Skip to main content
Requesting a quotation online is free
Book Now        Make a Payment        Testimonials        FAQs
New boiler? Get your boiler price online
Worcester Bosch boilers

Worcester Bosch boiler models and common faults.

Which Worcester Bosch boilers we work on, the model names you may find on the label, and the faults we are most often asked about. Heating People arranges diagnostic visits in East London and surrounding areas.

Book a boiler diagnostic

Get a Repair Quote from Your Photos

Call free 0800 118 2128

Engineer carrying a tool bag at the front door of a home, greeted by the homeowner

Worcester Bosch ranges we work on

Current ranges: Greenstar 1000, Greenstar 2000, Greenstar 4000, Greenstar 8000 Life, Greenstar i, Greenstar Ri, Greenstar CDi Classic, Greenstar Highflow.

Older ranges we still see: Greenstar Junior (24i, 28i), Greenstar HE Plus (ZWBR), 24i and 28i RSF, Highflow 400, 240 CF.

Model names you may find on the label

Greenstar i Combi 25 and 30, Greenstar 25i, Greenstar 34CDi Classic, Greenstar 35CDi Classic System, Greenstar 30CDi Classic Regular, Greenstar 21i System, Greenstar 18Ri, Greenstar 24i Junior, Greenstar 28i Junior, Greenstar 28i, Greenstar Highflow 440CDi, Greenstar ZWBR 11-35 HE Plus, Greenstar 4000 System.

This is a guide, not a complete list. The model name is usually on the front of the boiler or on its data label, and a clear photo of it helps us prepare. If your model is not listed, send it to us and we will confirm before you book. Range and model names were compiled from manufacturer and trade sources on 6 November 2026; names and availability change, and parts for older models cannot be guaranteed.

Faults we are asked about on Worcester Bosch boilers

Worcester Bosch notes from trade guides

  • Leaks and lockouts with a leak. A small leak can be a worn seal or valve, but corrosion of the heat exchanger or diverter valve is a more serious cause. These need the casing opened.
  • Condensate lockouts. A frozen or blocked condensate pipe, especially where it runs outside, is a common winter lockout.
  • Overheating lockouts. Pump faults, a condensate blockage or a blocked pressure relief valve can all trigger overheating codes.
  • Older models. Older Worcester boilers can still use a pilot light, where a faulty thermocouple, draught or carbon deposits can stop ignition.

Faults common to most gas boilers, Worcester Bosch included

  • Low or dropping pressure. A leak, recently bled radiators or a faulty pressure relief valve are the usual causes. A sudden drop suggests a leak; a gradual drop may only need repressurising.
  • Hot water but no heating, or heating but no hot water. On a combi, a stuck diverter valve is a frequent cause of lost hot water. Timer, thermostat and settings (for example after a power cut or clock change) are worth checking first.
  • Lockout in cold weather. A frozen or blocked condensate pipe, especially an external one, shuts many condensing boilers down. Low pressure, ignition or flame detection, a fan fault or a circuit board fault can also cause a lockout.
  • Kettling, whistling, gurgling or banging. Limescale or sludge on the heat exchanger causes kettling. Air in the system, low pressure or restricted flow cause the other noises.
  • Radiators cold at the top or bottom. Cold at the top usually means trapped air; cold at the bottom usually means sludge.
  • Water leaking from the boiler. Worn seals, a pressure relief valve discharging or corroded parts are typical. An engineer needs to open the boiler to diagnose it.
  • Switching itself off. Low pressure, a thermostat problem, a pump that is not circulating, closed valves or air in the system can all make a boiler cut out.

Trade guides do not tie these faults to particular Worcester Bosch models, so treat the lists as a guide to what a symptom can mean, not a diagnosis. A displayed code is useful evidence, not a confirmed failed component: the engineer assesses the boiler and the connected heating system before recommending the next step. Fault information was compiled from manufacturer and trade guides (including Which?, Checkatrade, HomeServe, Heatable and Boiler Guide) on 6 November 2026.

Next steps for your Worcester Bosch boiler

The £92.50 covers up to 45 minutes to investigate the fault. We aim to get your boiler working during the visit where possible. The fee is for the diagnostic visit and is payable regardless of the outcome. Any further repair work is agreed separately. What happens at the visit. At the end of the visit we’ll explain what we found, whether the boiler is working, whether any fix is temporary, and what we recommend next. If we can carry out the next stage, we’ll explain the scope and agree any additional cost with you before proceeding.